SDR Outsourcing for Manufacturers

By Published on 11 min read

In short

See how SDR outsourcing works for manufacturers: prospect lists built from CNAE and NCM codes, decision-makers, supplier approval, objections and cost.

In this article
  1. Why do manufacturers outsource pre-sales?
  2. Who is the ideal customer, and who makes the buying decision in manufacturing?
  3. How does SDR outsourcing for manufacturers work, step by step?
  4. Sample opening script for purchasing and engineering
  5. What does the SDR need to qualify before booking the technical visit?
  6. How does an SDR handle supplier approval, samples and long sales cycles?
  7. What objections come up in industrial prospecting, and how should you respond?
  8. Which metrics should you track?
  9. What experience does Contact SDR have with manufacturers?
  10. How much does outsourcing SDRs for manufacturers cost?
  11. When is outsourcing pre-sales not worth it for a manufacturer?
  12. Frequently asked questions

SDR outsourcing for manufacturers puts a pre-sales team to work opening new accounts and booking technical visits for your sales rep or sales agent. First, the SDR builds the list using CNAE and NCM codes. Then they reach purchasing, engineering or maintenance and qualify the application. The result: the plant gains a predictable channel that doesn’t depend only on trade shows and referrals.

Why do manufacturers outsource pre-sales?

To have a sales channel the plant itself controls. SDR stands for Sales Development Representative, the pre-sales professional: they prospect, qualify and book meetings while the salesperson negotiates. At many manufacturers, however, this stage has no owner:

  • The sales agent manages the existing book: they live on commission, so they prioritize customers who already buy.
  • Trade shows pack everything into a few days: contacts arrive all at once and then go cold with no follow-up.
  • The history lives outside the company: if conversations are only in the agent’s contact list, the account leaves with them.
  • The cycle is long: between first contact and purchase order come samples, testing and supplier approval. So whoever stops prospecting today feels it months later.

With SDR outsourcing for manufacturers, prospecting becomes a routine. There’s a list, a cadence (the planned sequence of touchpoints) and records in the CRM, the system that stores each account’s history. To dig deeper, read about pre-sales for technical markets.

Who is the ideal customer, and who makes the buying decision in manufacturing?

ICP is the ideal customer profile, meaning the description of the companies that buy the most, pay well and stay. In manufacturing, though, a purchase almost never has a single decision-maker: one person uses the product, another specifies it and another negotiates. The table below gives examples you can adapt.

Target company Who decides Trigger that opens the conversation Channel that usually works
Manufacturer that uses your item as a component Purchasing, engineering and quality New project or search for a second source Phone and LinkedIn
Plant that consumes maintenance items Maintenance and purchasing Scheduled shutdown or recurring breakdown Phone and WhatsApp
Company that imports what you manufacture Purchasing and executive leadership Exchange rate and import lead time Phone and email
Small and midsize manufacturer Owner and PCP, the production planning and control team Production bottleneck or rework Phone and WhatsApp

How do you find these companies using CNAE and NCM codes?

Two codes help build the list. CNAE, Brazil’s National Classification of Economic Activities, shows what each CNPJ (Brazilian company registration number) does. NCM, the Mercosur Common Nomenclature, classifies goods. With foreign trade data, such as that from Logcomex, a tool Contact SDR uses, you can find who imports or exports a given product. That way, the list is built by activity and also by item. See the method in how to segment your prospect list.

How does SDR outsourcing for manufacturers work, step by step?

Setup takes about 7 days and follows six steps. Here’s what’s different for manufacturers at each one:

  1. Assessment and ICP: the team maps product lines, applications, production capacity and sales agents’ account books. That way, the SDR doesn’t approach accounts that already have an owner.
  2. Value proposition and script: the pitch moves away from the catalog and toward the application, covering delivery time, total cost and technical support.
  3. List and cadence: the database is built from CNAE, NCM, company size, revenue and region, with two or three decision-makers per account.
  4. Training: the SDR learns the product line’s vocabulary and the limits of what they can claim. Specification questions go to your technical team.
  5. Going live: calls, emails, WhatsApp and LinkedIn outreach begin. Each visit then goes onto the calendar of the salesperson or sales agent for that region.
  6. Weekly tuning: the team reviews objections, rates and the list. The salesperson also reports which visits turned into samples or quotes.

Before investing in the list, test your offer in the ICP validation simulator. There, 100 simulated B2B decision-makers show you a score, objections and scripts.

Sample opening script for purchasing and engineering

The script below is just an example, since the real one comes out of the assessment. Notice that it asks for application information before asking for the meeting:

  1. Introduction: “Good morning, [name]. This is [SDR] from [manufacturer]. We make [product] for [application].”
  2. Situation question: “Do you currently buy this item from a single supplier, or do you already have an approved second source?”
  3. Next step: “Would it make sense for our technician to look at the application on site, for 30 minutes?”

With engineering and maintenance, the conversation centers on failures, service life and machine downtime. With purchasing, the topics are lead time, minimum order quantity and supplier registration. To build your questions, see the guide to SPIN Selling questions, a method based on situation, problem, implication and need-payoff.

What does the SDR need to qualify before booking the technical visit?

They confirm that there is an application, volume and a path to purchase. To do this, they use BANT (budget, authority, need and timeline), adapted to manufacturing:

  • Application: what product or machine does the item go into, and with what specification?
  • Volume: what is the monthly consumption, and is it bought per order or under contract?
  • Current supplier: what bothers them most today: lead time, quality, price or support?
  • Supplier approval: how is a new supplier approved, and who is involved?
  • Timing: is there a new project, a scheduled shutdown or an open budget?

If the account has application and volume but no timing, the SDR logs the date and follows up later.

How does an SDR handle supplier approval, samples and long sales cycles?

The SDR doesn’t shorten the approval process, but makes sure it starts with the right people. Supplier approval is the process in which the customer qualifies a new supplier: registration, documents, samples, a production-line trial and, sometimes, an audit. Quality certifications such as ISO 9001 are often part of the requirements too. That’s why the cycle takes months. After the technical visit, the SDR handles the follow-ups: confirming the sample arrived and scheduling the debrief on the test results.

Seasonality also matters. Many companies finalize their budgets at the end of the year, and many plants shut down for collective vacation between December and January (common in Brazil, where the summer holidays fall in that period). In addition, industries tied to harvests tend to concentrate maintenance in the off-season.

What if the sale goes through distributors and resellers?

In that case, the SDR works on two fronts. On the first, they prospect new distributors and resellers in regions with no coverage. On the second, they generate demand with end customers and hand the opportunity to the channel partner in that region. To make this work, the account ownership rules are set during the assessment: who owns the account and who makes the visit.

What objections come up in industrial prospecting, and how should you respond?

Four objections come up again and again, and each one calls for a short answer and a question:

  • “We already have an approved supplier.” The answer isn’t to ask them to switch, but to offer to be a second source: “Great. And when they’re late, who covers for them?” The SDR then suggests a sample for comparison.
  • “Just send me the catalog.” The SDR sends it, but first asks about the application: “Sure, I’ll send it. Which part or machine is it for?” Then they set a follow-up date right away.
  • “We don’t have budget this year.” Here, the question is when the company plans for next year. That way, the next contact is scheduled for that window.
  • “We only buy from registered suppliers.” In this case, it’s worth asking how registration works and who approves it. That turns the objection into the first step of the approval process.

Which metrics should you track?

Track the pre-sales numbers first, then the technical sales numbers:

  • Calls made and connection rate: the volume of attempts and the share in which the SDR reached the decision-maker.
  • Qualified leads: accounts with a confirmed application, volume and buying path.
  • Meetings booked and held: technical visits scheduled and those that actually took place.
  • Opportunities: visits that turned into a sample, trial or quote.
  • Objections: the reasons for rejection, used to refine the list and the script.

There’s no standard industry benchmark, because each product line has its own cycle and average deal size. So measure your own rates in the first few weeks. Contact SDR sends daily reports and records every call.

What experience does Contact SDR have with manufacturers?

Contact SDR has been doing outbound prospecting for 10 years and has more than 300 success stories. Past clients include ZF (auto parts and automotive systems), NAG Abrasivos (industrial abrasives), Melitta (food and beverages) and LG (electronics). The team has more than 50 in-office reps trained in SPIN Selling, BANT, rapport and Predictable Revenue, the method that separates prospecting from closing.

Even so, each project gets its own script, defined during the assessment. For another example from the sector, see how a manufacturer used a LinkedIn bot for prospecting.

How much does outsourcing SDRs for manufacturers cost?

The benchmark is R$ 6,500 to R$ 10,900 per outsourced SDR per month, including leads, software and supervision. The final price comes in a proposal and depends on team size, model, channels and ICP complexity. You can also start with a single SDR, either dedicated or shared among no more than 2 clients. The table compares the most common options in manufacturing.

Option When it makes sense Watch out for
Sales representative Serving an existing account base in a region Tends to prioritize existing customers
In-house SDR (CLT, Brazil’s formal employment regime) Large operation with a pre-sales manager Takes 3 to 6 months to ramp up and requires payroll taxes, tools and management
Outsourced SDR Opening new accounts and testing segments Starts in about 7 days, with no payroll costs for the client

See the breakdown in how much an outsourced SDR costs and learn about our SDR outsourcing service. If your company prefers to hire its own team, our sales recruiting service hires SDRs, salespeople and sales representatives, with a 30-day guarantee.

When is outsourcing pre-sales not worth it for a manufacturer?

Outsourcing SDRs isn’t right for every manufacturer. Avoid the model in three situations:

  • No spare plant capacity: if production is already fully booked, new accounts only cause delays.
  • A market with few buyers: when there are ten potential customers in the whole country, the sales director already knows them all.
  • Low-cost, simple-purchase items: low-value products sold over the counter or through an online store don’t justify one-to-one outreach.

It’s also pointless to book visits if there’s no salesperson or representative available to make them.

Frequently asked questions

Does an outsourced SDR need to be an engineer to prospect manufacturers?

No. The SDR needs to understand the application and ask good questions, not size the product. That’s why training covers the product line’s vocabulary and the limits of what the SDR should say. The technical side stays with your salesperson or engineer during the visit.

How long does it take for SDR outsourcing to deliver results for manufacturers?

The operation starts in about 7 days. Orders, however, depend on samples, trials and supplier approval, which can take months. So start by evaluating the technical visits held and the opportunities opened.

Does an outsourced SDR conflict with independent sales reps?

No, as long as the account ownership rules are made clear during the diagnostic. The SDR opens accounts that no one is covering and books the visit for the rep in that region. The rep gets meetings that are ready to go, and the plant keeps the full history in the CRM.

Does outsourced pre-sales work for manufacturers that want to export?

Yes, but the language, time zone and data sources change. That’s why target countries and calling hours are defined during the diagnostic. See the details in our guide to SDR outsourcing for Latin America.

Want a predictable pipeline of new accounts for your plant? See how Contact SDR’s SDR outsourcing works or talk to a specialist on WhatsApp.

Avalie esse conteúdo post
Danilo Diniz, founder of Contact SDR

Written by

Danilo Diniz

Founder of Contact SDR

Danilo Diniz é fundador da Contact SDR, call center pioneiro em terceirização de SDR no Brasil. Tem 19 anos de experiência em prospecção e é consultor do método Receita Previsível. Liderou operações comerciais para empresas como Vivo, Shell, Magazine Luiza e Mondial. Escreve sobre pré-vendas, prospecção B2B e gestão comercial.

Keep reading

Want more meetings with decision makers on your calendar?

Tell us what you sell and to whom. Contact SDR will show you how outbound prospecting would work in your company, with no commitment.